Loading

Original Character - Makoto Shiroikone - 1/7 - Onepiece ver (FOTS Japan)Original Character - Makoto Shiroikone - 1/7 - Onepiece ver (FOTS Japan)¥ Köp¥ Köp

Original Character - Makoto Shiroikone - 1/7 - Onepiece ver (FOTS Japan)
Kategori
Material
Skala & Dimensioner
1/7  H=110mm (4.29in, 1:1=0.77m)
Släppdatum
05/30/2019 As Standard
Japanska11,121 visningar • 60 kommentarer19 favoriter

Köp

Kommentarer60

In stock @ Nin-Nin-Game (¥8,640)
Brand New! => Original Character - Makoto Shiroikone Onepiece ver. [Fots Japan]
~71.97 € / ~$85.41
└ +5% Points on all Orders!
└ Worldwide Express Shipping! ✈
In stock @ Solaris Japan

Pre Owned for ¥15,935
└ Check product page for item condition.
Selling mine brand new.

CLASSIFIED #206289

Also selling her darker twin. Discount for purchasing set.


SOLD!
4 månader sedan
<deleted>
1 år sedan
Wow, the comments here are making me worried regarding the overall quality. Still waiting for mine from Figuya. o( ×_× )o

darkfaderthe material lets through too much light when close to a LED source

Indeed, she looks rather ghostly on the pictures. And soooo small.
1 år sedan
darkfader ⱠØⱠł₵Ø₦
The material itself isn't that bad. Only notice printing effect really close-by. I don't like the fact though that the material lets through too much light when close to a LED source.
And they could've glued the parts better on mine. There is a small gap everywhere. I did fill/glue myself a bit; excess glue can be sanded off pretty easily since there is no risk of paint damage.
1 år sedan
Jenthehen Otaku at Law
darkfader1 år sedan#64021878Apparently it is just a newer PMMA version, so yes.
www.reddit.com/...


3D print material (to op) ... I feel torn on it. On the one hand, it's waaaay more forgiving than the previous PMMA they were using, so there is a much lower risk of these figures breaking in transit (or if you knock them over, etc.) BUT, the colors don't seem quite as vibrant/striking and the long-term stability seems to be a bit of an issue (at least with the Hana figure ITEM #763520 a lot of people have gotten her where her support foot has just crumpled when she was packaged).
1 år sedan
darkfader ⱠØⱠł₵Ø₦
Nanahira1 år sedan#52548464What the fuxk is pvc-l? Pvc lie?

Apparently it is just a newer PMMA version, so yes.
www.reddit.com/...
1 år sedan
Jenthehen Otaku at Law
LeviathanX1 år sedan#62748019FOTS has a great support... My seller contacted them and told me their answer "Send the figure back to Japan, we glue it together"
Well, bummer. I am gonna glue it myself then. Seller gave me a little discount as compensation.


Yeah, that sounds like Fots/Insight - another reason it's good to order from Solaris b/c they will open and if something is wrong THEY deal with them and the repair!

I have no idea how I've been so lucky with Fots and Insight figures, but I'm crossing my fingers it keeps up lol
1 år sedan
Jenthehen1 år sedan#62677646Sad break :(
Does it stick back on smoothly/easily? Might be an easy fix with glue.

FOTS has a great support... My seller contacted them and told me their answer "Send the figure back to Japan, we glue it together"

Well, bummer. I am gonna glue it myself then. Seller gave me a little discount as compensation.
1 år sedan
Your hassle-free Japan shopping proxy .

Bilder51

Relaterade Artiklar

Gemenskap

Önskad av
Listed in
Medelbetyg
8/10 Betygsatt 7 gång(er)

Relaterade Klubbar7

Historik 5

Tillagd av
Agon 1 år sedan
Senast ändrad av
Kaneel 1 år sedan