Loading

To LOVEru Darkness - Momo Belia Deviluke - 1/1 (Design Co-Co, Toranoana)To LOVEru Darkness - Momo Belia Deviluke - 1/1 (Design Co-Co, Toranoana)¥ Köp¥ Köp

To LOVEru Darkness - Momo Belia Deviluke - 1/1 (Design Co-Co, Toranoana)
Kategori
Skala & Dimensioner
1/1  W=900mm (35.1in)  L=700mm (27.3in)  H=1,600mm (62.4in, 1:1=1.6m)
Släppdatum
10/2017 As Limited + Exclusive
Pris
Diverse
30000g
Japanska88,259 visningar • 86 kommentarer43 favoriter

Köp

Information

Limited to 10 pieces.
Sales will be determined through lottery.

Applications can only be made at the Toranoana Akihabara C Shop between the 24th May 2016 to the 26th June 2016.
www.toranoana.j...

Kommentarer86

There were only 10 made, and 7 people on mfc own it? I doubt they really do
20 dagar sedan
Zero16 månader sedan#76629921Is there someone on myfigurecollection who really has this figure?
Since there are only 10 pieces of it, I doubt it, but should there still be a miracle
and someone owns this figure, I would be happy, if they would offer me this figure,
since I really want it.


Her Price will be 10 to 20 million yen, will u still be interested ?
4 månader sedan
Is there someone on myfigurecollection who really has this figure?

Since there are only 10 pieces of it, I doubt it, but should there still be a miracle
and someone owns this figure, I would be happy, if they would offer me this figure,
since I really want it.
6 månader sedan
nobody actually bought one did they... o > o
2 år sedan
eekster2 år sedan#27046073How they reinforced them is what I would like to know. If I'm buying a $25K figure, it better be lined with fiberglass and steel welded skeleton and not just 3D extruded plastic.
Source: Process starts after the 3D Printer pic


Thanks for the link, nice to see how they actually do it. And yes, I would be curious to see the mechanical aspect of it. And nobody knows if the material with age well over decades. As for the price, I do agree the profit margin seems rather comfortable isn't it? ;-)
2 år sedan
sailormatlac3 år sedan#26605243Never underestimate prototyping costs, particularly when only making 10 figures out of the mold. Mold making is also a huge part of the cost. Certainly, they must make a healthy profit out of it due to "rarity".

I think they probably don't know how to make molds. Plus, if they're only making 10 pieces, it'd be more viable to just 3D print instead of making molds that will take up so much space. Just turn that bad boy on and work it tirelessly 24/7 and you got something for the price of a car. How they reinforced them is what I would like to know. If I'm buying a $25K figure, it better be lined with fiberglass and steel welded skeleton and not just 3D extruded plastic.

Source: Process starts after the 3D Printer pic
2 år sedan
eekster3 år sedan#22485323https://static.myfigurecollection.net/pics/figure/big/18351.jpg
Me: Why's this only about $4000 and the one you're making close to $25,000?
Them: Because we prototyped in 3D printer which costs a lot.
Of course, that's just a scenario I played in my mind. I watched their build process but I can't find it again. They do used a massive 3d printer with a massive build volume but I don't see why it costs 6x to make. If it was twice as that of Rei, it can be justified. Is it made out of unicorn tears, caviar, and gold flakes?


Never underestimate prototyping costs, particularly when only making 10 figures out of the mold. Mold making is also a huge part of the cost. Certainly, they must make a healthy profit out of it due to "rarity". My only concern is after paying that huge amoutn of cash, you get an oversized stiff and awkward 1990s garage kit. Isn't sad?
3 år sedan
https://static.myfigurecollection.net/pics/figure/big/18351.jpg
Me: Why's this only about $4000 and the one you're making close to $25,000?
Them: Because we prototyped in 3D printer which costs a lot.

Of course, that's just a scenario I played in my mind. I watched their build process but I can't find it again. They do used a massive 3d printer with a massive build volume but I don't see why it costs 6x to make. If it was twice as that of Rei, it can be justified. Is it made out of unicorn tears, caviar, and gold flakes?
3 år sedan
I'd pay 3k for this .seeing how 1/2 goes for about 1200...
3 år sedan
i saw her, in a my travel in japan, it's pretty awesome.
very detailed for the scale, maybe one of the best i see for a 1/1
3 år sedan